There are a lot of tractor brands, but the one which stands out the most is John Deere amongst which a John Deere GT275 is considered the best. Manufactured during mid 90s to late 90s, it was one of the most expensive tractors of the time costing around $5k.
In this article, we will provide the latest review of a John Deere GT275 lawn and garden tractor with all its features and specifications, along with the advantages and disadvantages of the tractor.
Table of Contents
About John Deere GT275
John Deere GT275 is a popular lawn and garden tractor manufactured between the years 1995 to 1998 at the John Deere Horicon Works plant in Horicon, Wisconsin, USA. It is equipped with some latest technologies of the time and is one of the top models from the company’s GT series.
It is compatible with various different attachments, and it was one of the most expensive lawn tractors at the time, with original pricing of around $4,999 in 1995. It offers an open operator station and manual steering.
GT275 serial numbers during the different manufacturing years were:
- 1995- 045001
- 1996- 055001
- 1997- 070001
- 1998- 090001
In this model, the serial number decal is seen above the drawbar on the rear of the GT275.
Specs of John Deere GT275
| General Specifications: | |
|---|---|
| Model | John Deere GT275 |
| Manufacturer | John Deere |
| Type | Garden tractor |
| Series | GT200 Series |
| Length (overall) | 69 inches |
| Weight | 513 lbs* |
| Wheel Base | 47.75 inches |
| Width | 39 inches |
| Height | 43 inches |
| Tires: | |
| Lawn/turf front (ag) | 16x6.50-8 |
| Lawn/turf rear (ag) | 23x10.50-12 |
| Engine Specifications: | |
| Engine Manufacturer/ model | Kawasaki FC540V |
| Engine type | air-cooled vertical-shaft |
| Engine Power (Gross) | 17 hp |
| No. of cylinders | 1 |
| Bore and stroke | 3.50x3.38 inches |
| Displacement | 534 cc |
| PTO (claimed) | N/A |
| Compression ratio | 8.3:1 |
| Starter | Electric |
| Starter volt | 12 |
| Cooling System | N/A |
| Rated RPM | N/A |
| Operating RPM | N/A |
| Fuel type | gasoline |
| Air cleaner | paper and foam |
| Preheating | N/A |
| Fuel system | carburetor |
| Fuel tank capacity | N/A |
| Electrical : | |
| Battery | N/A |
| Ground | Negative |
| Charging system | Flywheel alternator |
| Charging amp | 15A |
| Battery CCA | CCA 295A |
| PTO: | |
| Rear PTO | N/A |
| Rear RPM | N/A |
| Engine RPM | N/A |
| Mid PTO | N/A |
| Mid RPM | N/A |
| Engine RPM | N/A |
| Transmission & Chassis: | |
| Type | belt-driven hydrostatic |
| Oil Capacity | 1.7 qts |
| Coolant capacity | N/A |
| Brakes | Internal wet disc |
| Gears | infinite forward and reverse |
| Cruise control | N/A |
| Steering type | Manual sector-and-pinion |
| Differential lock | N/A |
| Operator system | N/A |
| Chassis | 4×2 (2WD) |
| Speed | Forward: 11.2 kmh (7.0 mph) Reverse: 6.4 kmh (4 mph) |
| Hydraulics: | |
| Type | N/A |
| Pressure | N/A |
| Capacity | N/A |
| Rear valves | N/A |
| Mid valves | N/A |
| Total flow | N/A |
| Tractor Hitch: | |
| Rear type | N/A |
| Rear lift (at 24"/610mm) | N/A |
| Attachments (optional): | |
| Mower deck | 44" mid-mount mower deck 48" mid-mount mower deck |
| Blade | 3-blade |
| Loader | N/A |
| Backhoe | N/A |
| Production: | |
| Manufacturing location | Horicon, Wisconsin, USA |
| Production years | 1995 - 1998 |
| Price | $4,999 |
Features of John Deere GT275
The brand name of John Deere precedes its glory. It is one of the oldest automobile manufacturers in the United States.
The GT series has largely been appreciated by the agricultural community as the entire production of the GT series lawn and garden tractors ensured the highest quality.
The John Deere GT275 comes with a manual sector and pinion steering wheel and internal wet disc brakes. It has an open operator station with easy-to-reach controls.
It uses an engine manufactured by one of the world’s reputed engine and automobile manufacturers ‘Kawasaki’. GT275 has a gasoline engine that can generate 17hp at 3600 rpm.
It can use attachments like a mower deck, snowblower, or 42-inch blade to suit your lawn work.
It has an automatic gear transmission with infinite forward and reverse gears. It is a great feature to have, as people with little or no experience with manual gear transmission can opt for this one as it requires no gear changing to speed up, slow down, or reverse.
1. Engine
John Deere has collaborated with the renowned engine manufacturers Kawasaki to provide the latest engine of the utmost quality.
John Deere GT275 uses a Kawasaki FC540V gasoline engine that generates 17.3 PS (12.7 kW; 17.0 HP) at 3,600 rpm of horsepower.
It is a single-cylinder engine equipped with an air-cooled vertical shaft. It is capable of performing all the lawn and garden work with durability.
2. Transmission
John Deere GT275 comes with an automatic hydrostatic transmission with infinite forward and reverse gears.
It was laced with all the latest technology of the time, and its automatic gearing feature went very popular amongst people who had trouble understanding the manual transmission or gearing system.
3. Chassis
The chassis of the John Deere GT275 offers an open operator station. It has a 4×2 2WD driving convenience, manual sector, and pinion steering wheel.
It provides an internal wet disc braking system and an independent front PTO with an electric clutch.
4. Attachments
John Deere has been vastly known to provide features and ease to their customers, which other companies and brands don’t.
It is one of the reasons why John Deere has become so popular all around the globe. It allows various components to be attached and added to their tractors according to the need of their uses, increasing their overall productivity.
Some of the attachments which are compatible with John Deere GT275 are:
- It allows a mower deck to be installed; additionally, a John Deere Piranha 44″ mid-mount right-discharge mower deck with a 3-blade and manual lift having a cutting width of 1,110 mm (44 in) makes the tractor even more effective.
- It also provides an alternative for a 48-inch mid-mount right-discharge mower deck with a 3-blade and manual lift having a cutting width of 1,210 mm.
- John Deere: 42″ front-mount blade with manual lift and manual angle.
- Width 1,060 mm (42 in).
- Snowblower is very beneficial around cold regions of the state; a John Deere 2462M 38″ front-mount, single-stage snowblower with manual lift.
- Width 960 mm (38 in) is an addition that can be installed externally and increase its advantages.
Pros and Cons of John Deere GT275 Tractor
All products have benefits and disadvantages, some disadvantages may suit your requirements, or some benefits may not be of your use.
Hence, it is very important to know all the information and what a product has to offer before making a decision.
Pros
- Quality and Durability
John Deere has been in the automobile manufacturing business for a long time, and they are hailed for their quality products.
It has been a long time since GT275 was manufactured, and there are not many complaints about it to date. It produces good quality products which are very durable.
- User Friendly
It offers a user-friendly interface, and people with very low or almost no knowledge of manual gearing systems or transmission can very easily understand the operating functions of the tractor.
It has a simple control system that is easily reachable, and it also provides good comfortable seating to the operator.
- Effective Engine
It presents you with effective engine power in accordance with its size. The engine is manufactured by Kawasaki, making it very reliable.
One can bank on its power to do towing, lifting, mowing, and other light gardening kinds of stuff. It can perform lawn duties in hard, rough terrains without much hassle.
- Attachments Availability
The attachments compatible with John Deere GT275 are vast. As many attachments can be installed in this model, they are very easily available in the market. This increases the overall value and productivity of the John Deere GT275.
Cons
- Pricing
One factor of John Deere, which is somewhat criticized, is the cost of its products. The pricing of the John Deere tractors is higher than their competitors.
- Maintenance
It requires maintenance like any other machinery, and some of the attachments and their components are very expensive, making maintenance a trick job.
- Pollution
Noise or any other kind of pollution is very dangerous, and the sound John Deere GT275 produces can be irritating, especially if your bordering partners are not much of a tolerator.
Price
The important factor about John Deere GT275 is its cost. Its launching price in the year 1995 was around $4,999.
The price has changed now, and the pricing is approximately $400 to $500, depending on the condition, usage, and attachment.
FAQ’s
John Deere GT275 uses a Kawasaki FC540V gasoline engine which has a fuel capacity of 10.4 liters (2.7 US gal.; 2.3 Imp. gal).
John Deere GT275 is compatible with a lot of various attachments, including a
44 and 48-inch mid-mount mower deck, a snowblower, a blade, and many others.
John Deere GT275 is equipped with an automatic hydrostatic transmission with infinite forward and reverse gears.
Conclusion
If you are considering a tractor for your lawn work, choosing the right one can be tough. This is where our latest review of John Deere GT275 will provide you with all the information to ease your stress.
The specifications, along with the pros and cons, will help you decide whether the John Deere GT275 will be able to fulfill your needs or not.